O Holy Night "A wonderful Christmas" Ornament

New on the Heartfelt Creations Blog today. My O'Holy night "A wonderful Christmas" ornament using the  O'Holy Night collection. To see the full collection head over to Heartfelt -  O'Holy Night Collection

Heartfelt Creations Products

HCD1-7188 Noel Ornament Die HCPC-3834 Noel Sentiments Stamp 159723 Designer Dries Clear adhesive Other Products Used White Cardstock, Silver Foil Cardstock, Silver Twine, Silver Satin Ribbon, Silver Sheer Ribbon, Versacolor White Ink, Ranger White Embossing Powder, 3d dots, glue gun, heat gun, white eyelets, croppadile or eyelet setting tool. Instructions  Die cut 2 solid ornament panel in silver foil and 3 white solid ornament panels using your large die from the Noel Ornament Die Set. Using a eyelet setter, set 1 white eyelet in the top of each panel. Die cut 2 white panels in the size smaller using your Noel Ornament Die Set. Die cut 2 decorative panels in silver foil. Using your white Versacolor ink stamp you desired sentiment from the Noel Sentiment Stamp set onto your decorative panel and using white embossing powder heat set with your heat gun. Heat set from a further distance than usual as your foil may bubble. Using 3 dots adhere your large ornaments panels together ending with a silver layer on each end of your decoration. Thread through your silver twine and tie off to create the hanger. Using 3d dots adhere your white layers. Tie 1 sheer bows and 1 satin bows and 1 twine bow and using your hot glue gun adhere together.  Using a hot glue gun attach the bows to the top of your decoration on the front and back.  Using designer dries clear adhesive place some glue on the left and right sides of your decorative panel and hold in place so that it is arched in the center.  Repeat with the others decorative panel for the back of your decoration. Happy Crafting Tracy C x x

O Holy Night "A wonderful Christmas" Card

New on the Heartfelt Creations Blog today. My O'Holy Night Christmas ornament card using the O'Holy Night collection. To see the full collection head over to Heartfelt - O'Holy Night Collection

Heartfelt Creations Products

HCD1-7188 Noel Ornament Die HCPC-3834 Noel Sentiments Stamp 159723 Designer Dries Clear adhesive

Other Products Used

Couture Creations Embossing Folder – To be jolly CO725496, White Cardstock, Silver Foil Cardstock, Silver Twine, White Satin Ribbon, Silver Sheer Ribbon, Versacolor White Ink, Ranger White Embossing Powder, Silver Rhinestone, 3d dots, glue gun, heat gun.

Instructions

Die cut 1 solid ornament panel in silver foil and 1 white panel in the size smaller using your Noel Ornament Die. Die cut 1 decorative panel in silver foil. Using your white Versacolor ink stamp you desired sentiment from the Noel Sentiment Stamp set onto your decorative panel and using white embossing powder heat set with your heat gun. Heat set from a further distance than normal as your foil may bubble.
Cut your card base 11” x 5 ½” using white cardstock. Cut 1 mat 5 ¼” x 5 ¼” using silver foil. Cut 1 mat 5” x 5” using white cardstock and emboss with embossing folder.
Adhere your silver foil and white embossed layers flat. Tie 1 sheer bows and 1 satin bows.  Using a hot glue gun adhere your solid bow and then your sheer bow in the top center of your card.  Using 3d dots adhere your silver ornament in the center of your card with the tip of the ornament sitting on the bows, using 3d dots again layer your white ornament. Using glue place some on the left and right sides of your decorative panel and hold in place so that it is arched in the center.  Tie a bow using your silver twine and adhere at the top of the ornament in front of your other bows. Adhere 1 small silver rhinestone in the center of your holly at the bottom of your decorative panel.

Happy Crafting
Tracy C x x 

   

O Holy Night Christmas Card

New on the Heartfelt Creations Blog today. My O'Holy Night Christmas  card using the O'Holy Night collection. To see the full collection head over to Heartfelt - O'Holy Night Collection

Heartfelt Creations Products Used

HCPC-3833 Silent Night Scroll Cling Stamp Set
HCPC- 3822 Poinsettia & Holly Clusters Cling Stamp Set
HCD1-7186 Silent Night Scroll Die
HCD1-7176 Poinsettia & Holly Clusters Die
HCFB1-463 3d Poinsettia Shaping Mold
HCDP1-292 O Holy Night Paper Collection
159723 Designer Dries Clear adhesive
HCDA2-450 Stack and Store Daubers
HCST1-401 Deluxe Flower Shaping Tool Kit

Other Products

White cardstock for die cutting and stamping, white cardstock, red ribbon, Memento Expresso Truffle, Tuxedo Black, Rich Cocoa, Versafine Olympia Green, Onyx Black, Distress Antique Linen, Walnut Stain, Iridescent Medium, Copic Markers YG64, R24, CO, E31, Y26. Instructions Stamp your Scroll using your Silent Night Scroll stamp set using Memento Espresso Truffle, Color the leaves using Copic Markers YG63 and R24, candle in CO, candle holder in E31 and the flame in Y26. sponge the scroll using a mixture of Ranger Distress Antique Linen and Walnut stain around the edge to highlight. Stamp 2 pinecones using your Silent Night Scroll stamp set using a combination of Memento Rich Cocoa and Versafine Olympia Green inks and then paint in iridescent Medium. Stamp your Merry Christmas Sentiment from the same set using Versafine Onyx Black ink and paint with Iridescent Medium. Cut with co ordinating dies. Using your 3d poinsettia Stamp set, stamp each size of the poinsettias and leaves using Memento Tuxedo Black ink, color the poinsettias in Copic Marker R24 and the leaves in YG63. Die cut with co ordinating die and shape with matching mold. Finish of your shaping with your Deluxe tool kit. Cut your card base using white cardstock 12” x 12”. Cut your selected mat 5 ¾ x 5 ¾”. Adhere your card front. Using 3d dots adhere your scroll and pinecones. Adhere poinsettias and leaves as desired or as pictured.  Tie a bow and adhere in the top right corner. Adhere you Sentiment over the center of the bow. Highlight with stickles. Happy Crafting Tracy  x x

Noel Ornament

New on the Heartfelt Creations Blog today. My O'Holy Night Christmas ornament using the O'Holy Night collection. To see the full collection head over to Heartfelt - O'Holy Night Collection

  Heartfelt Creations Products

159723 Designer Dries Clear adhesive HCD1-738 Noel Ornament Die Other Products Used White Cardstock Pearl Pin Pearl Brads white eyelets Silver Twine, WhiteSatin Ribbon White Sheer Ribbon Windsor Newton Iridescent Medium 3d dots.

 

Instructions

Die cut 6 solid ornament panels and 2 decorative ornament panels using your Noel Ornament Die. Apply Iridescent Medium to your decorative panels and allow to dry. Hole punch and set eyelets in the top of the plain panels. 

Using 1 panels line your pin up so it hangs out the bottom at your desired length and glue the 2^nd panel over the top to secure your pin in place, you can also tape your pin in place first to hold it better before gluing. Using 3d dots adhere all your levels together. You will have 5 plain layers and 2 decorative layers.

Using the silver twine, thread through the top of your ornament and tie in place. Tie 2 sheer bows and 2 satin bows. Using a hot glue gun adhere the satin bows to the sheer bows. Using a hot glue gun adhere 1 bow to the front and 1 bow to the back. Using a hot glue gun adhere your pearl brad to the center of snowflake on the front and back of your ornament.

Happy Crafting
Tracy C x x

Sweet as Honey Bees

New on the Heartfelt Creations Blog today. My Sweet as Honey bees card using the Sweet as Honey collection. To see the full collection head over to Heartfelt - Sweet as Honey Collection

Heartfelt Creations Products

HCPC-3830 Honey Bee Bungalows Stamp Set HCPC-3831 Sweet as Honey Stamp Set HCD1-7184 Honey Bee Bungalows Die HCD1-7185 Sweet as Honey Die HCDP1-290 Backyard Blossom Paper Collection HCDA2-450 Stack and Store Daubers  159723 Designer Dries Clear adhesive

Other Products Used

Bone folder, mini mister, white card for stamping and die cutting, White Linen Card, Black Card, Memento Tuxedo Black Ink, Distress Ink Antique Linen and Wild Honey, black marker, Copic Marker E51, Y38, E55, Diamond Stickles, Nuvo Crystal Glaze, Acetate. Instructions I like to do all my die cutting, stamping and coloring first. Using Memento Tuxedo Black ink stamp the “you are sweeter than honey” sentiment from the Sweet as Honey stamp set on yellow cardstock from the Backyard Blossoms paper pad, die cut with the second smallest hexagon die. Stamp the bees on white cardstock using the same set and same ink, color using Antique Linen all over first, then Wild Honey through the center, use a black marker for the stripes, die cut with coordinating die. Apply stickles to the wings and crystal glaze to the body, when dry lightly spray with the mini mister and bend up the wings.  Using your Memento Tuxedo Black ink also stamp the honey pot and honey dipper from the Honey Bee Bungalow stamp set on white cardstock.  Color your honey dipper in Antique Linen, then highlight with Copic Marker E55. Color your honey pot all over in the Antique Linen ink, highlight the burlap using your E55 Copic Marker, color the honey section in E51, then highlight in Y38, die cut with coordinating die, apply crystal glaze. When your bees are dry, I like to what I call float them, cut a strip of acetate approximately 1cm wide, you can trim the length later, fold over the top about 1 cm to create a right angle, adhere your bee to the front side so when laid flat your bee in risen, repeat with all three bees. Die cut 1 black hexagon using the 2nd largest die. Die cut 1 black honeycomb and trim down to size.  Cut your card base using the white cardstock 8 1/2” x 6 1/8”. Fold your card in half, I like to run a bone folder over the spine of the card to give it a clean finish.   In the center of the card, cut out the honeycomb die. Select a yellow patterned cardstock from your Backyard Blossoms Paper Pad, trim down 5 ½” x 3 ½”. Cut 1 white mat 6 1/8” x 4 ¼”. Now you have all your elements done you can assemble your card. Adhere your black honeycomb die cut so it shadows your honeycomb from the card front. Adhere your yellow mat behind the honeycomb dies. Adhere your white mat to the card inside to conceal your patterned card. Lightly ink around the white honeycomb on the front using Antique Linen ink. Line up your bees where you want them, trim the strips so when they are adhered they will be concealed under the sentiment and the honey pot. Adhere in place. Using 3d adhesive adhere the black hexagon in the bottom right corner, make sure to cover your acetate strips, using 3d adhesive adhere the sentiment.  Adhere your honey dipper on the left edge of the black hexagon, just the dipper the handle will float free. Adhere you honey pot to the left making sure to cover your acetate strip. You can play around with the back bend of the acetate as to how high you want your bees to sit. TIP: This is a great way to float a butterfly, flowers or anything your wish to look like it is floating in the air. Happy Crafting Tracy C x x