Patchwork Daisy Celebrating you Card

New on the Heartfelt Creations Blog today. The Patchwork Daisy Collection. This is another project using these cute flowers. I hope you enjoy..

Heartfelt Creations Products Used

HCPC3854 Hand Stitched Background Cling Stamp set.
HCPC3853 Patchwork Daisy Border Cling Stamp set.
HCD17209 Patchwork Daisy Border Die
HCD17210 Eyelet Border Basics Die
HCD17120 Fleur Border Basics Die
HCPC3825 Butterfly Kisses Cling Stamp Set

HCST1401 Deluxe Flower Shaping Tool Kit

159723 Designer Dries Clear Adhesive
DDOTS 3d foam dots
HCDA2450 Stack & Store Daubers
TSMP602 Memento Teal Zeal
TSMP707 Memento Bamboo Leaves

Other products Used

White Cardstock
Versacolor White Pigment Ink
Ranger White Embossing Powder
Anti Static Pad
Heat Gun

Blending Tool
Assorted white buttons
Blue Sheer Ribbon
Silver Twine Ribbon

Card instructions

Cut your white card base 11 1/2" x 6 1/4". Fold in half. Using your Fleur Border Basics Die. Die cut a wavy edge down the right hand front side of your card. Using your Eyelet Border Basics Die, cut one eyelet border to match. Line this up with your Fleur Border basics die to get a strip. 

Cut a white mat 5 3/4" x 6 1/4" and using an anti static pad and wipe over your white cardstock, this stops things sticking on your image when you heat set. Using your Handstitched Background Cling stamp, stamp your background using your white pigment ink. Cover in white embossing powder and shake of the excess and heat set with a heat gun. When cooled and dried using a blending tool blend the teal zeal ink all over the stamped image, shading lighter in the middle and darker to the edges. When covered wipe of with a dry cloth to reveal the white embossed image. Line this up on your card front and using tape hold in place your Fleur Border basics die to match the curve of your card front. Trim to size and adhere your eyelet strip over the front. Using 3d dots adhere to your card front.

Using an anti static pad wipe over your cardstock, stamp your Patchwork Daisy Border using white ink and cover in white embossing powder and shake of excess and heat set with a heat gun. When cooled and dried using your stack and store daubers color your flowers in teal zeal a little heavier than you background and color the leaves in bamboo leaves. Wipe with a dry cloth to reveal the white embossed image. Die cut with coordinating die and trim to fully removed from the cardstock and using 3d dots adhere to the card front. Adhere the flowers with the 3D dots and use a little glue under the border to hold onto your card front. You will get a wavy up and down effect by using a combination of 3D dots and glue.

Tie a sheer ribbon around the top of the card and tie a bow. Tie a bow with the silver twine and adhere over the top. Adhere different size white buttons to the flower centers.

Hope you enjoyed my card

Happy Crafting 

Tracy x x

Fashionista Congratulating you card

New on the Heartfelt Creations blog today, the Exquisite 

Fashionista Collection. I have laced up a corset card just for you today. I hope you enjoy. 

Heartfelt Creations Products Used

HCD17215 Floral Fashionista Die
HCD17216 Floral Corset Die
HCD17217 Elements of Fashion Die
HCPC3855 Floral Fashionista Cling Stamp set
HCPC3856 Floral Corset Cling Stamp set
HCPC3857 Elements of Fashion Cling Stamp set
HCFB1471 3D Petite Florals Mold
HCPC3854 Hand Stitched Background Cling Stamp set

HCD17203 Ornaments Tags Die

HCPC3847 Celebrate Love Sentiments
HCD27191 Intricate Swirls Frame
HCPC3825 Leafy Accents Cling Stamp set

HCD17193 Leafy Accents Die

HCFB1467 Leafy Accents Mold

159723 Designer Dries Clear Adhesive
HCDA2450 Stack & Store Daubers
HCST1401 Deluxe Flower Shaping Tool Kit
DDOTS 3d adhesive

Other Products Used

Black Cardstock

White Cardstock

Neutral Cardstock

Black 3mm ribbon

Black Eyelets
Silver Rhinestone
White Lace
Versafine Olympia Green
Distress Peeled Paint
Versafine Onyx Black
Versafine Smoky Grey
Distress Vintage Photo
Distress Walnut Stain

Instructions

Using your neutral cardstock, cut your card base 12" x 6". Bone fold at the 7 1/2". Cut a mat of black cardstock 7 1/2" x 6 and join at the back to make a large card. This will give you a two tone card back. Cut a white mat 7" x 5 3/4" and adhere to the insert of your card.

Using your Intricate Swirls Die cut 1 frame using black cardstock. Using your Elements of Fashion Die, cut one background in black cardstock.

Using your Hand stitched Background Stamp, using Versafine Smoky Grey ink, stamp on white cardstock. Using a blending tool ink with Vintage Photo and then with Walnut Stain.

Using Versafine Smoky, stamp your bodice from the Floral Fashionista Stamp set on white cardstock and using a blending tool ink with Vintage Photo and the with Walnut Stain.

Using Versafine Smoky grey stamp your lace up corset from the Fashionista Corset Stamp set on white cardstock. Using a croppadile or eyelet tool punch the holes and set black eyelets in each hole. Thread with 3mm ribbon. 

Stamp your Leafy Accents stamp on white cardstock in Versafine Olympia Green ink and color with Peeled Paint, cut with coordinating die and spray lightly with water and shape in Leafy Accents Shaping Mold.

Using your Floral Fashionista Die, die cut a selection of flowers using black cardstock. Lightly spray with water and shape in the Petite Florals Shaping Mold. Adhere 2 together for each flower. 

Die cut 1 black and 1 white tag using Ornamental Tags die. Stamp  "Congratulations" from the Celebrate Love Sentiments stamp set on the white tag using Versafine Onyx Black ink.

Card Assembly - Cut a little slit in the top right corner of the black intricate swirls mat and slide in the hand stitched background mat, adhere in place with glue. Using 3d adhesive, adhere the mats on a slight angle to the card front. Under the bottom edge adhere your lace. Lay down the black elements swirl on the left hand side of your card front.

Then adhere your leaf spray in the bottom left corner and in the top right side of the bodice. Using 3d adhesive adhere your bodice in place. 

Adhere your lace up corset over the bodice. Adhere your Petite Florals 2 on the left, 1 on the bottom and 1 smaller flower on the top right of the bodice. Adhere rhinestones to the flower centers.

Adhere your black tag and using 3d adhesive adhere your white "congratulations" tag above the black tag. Adhere a little lace in the top left corner just under the bodice and adhere a small piece of lace just under the "congratulations" tag.

Happy Crafting 

Tracy x x

Hope your all patched up card

New on the Heartfelt Creations Blog today. My super simple "Hope you get all patched up real soon" card made with the Buttons & Blooms Collection.

Heartfelt Creations Products

HCD17205 Buttons & Blooms Die
HCPC3849 Buttons & Blooms Cling Stamp Set
HCD17206 Patchwork Pocket & Patterns Die
HCPC3850 Patchwork Pocket & Patterns Cling Stamp

HCPC3851 Hand Stitched Accents Cling Stamp Set

HCD17193 Leafy Accents Die
HCPC3835 Leafy Accents Cling Stamp Set
HCFB1467 3D Leafy Accents Shaping Mold

HCDP1295 Buttons and Blooms Paper Collection
TSMP707 Memento Dye Ink - Bamboo Leaves
TSMP201 Memento Dye Ink - Morocco

TSMP602 Memento Dye Ink - Teal Zeal

HCST1401 Deluxe Flower Shaping Kit
159723 Designer Dries Clear Adhesive
DDots Double Dots 100pc - 3D Foam Circles

Other Products Used

Distress Peeled Paint Ink
White Cardstock
Diamond Stickles
Twine

Instructions

Using your Buttons and Blooms stamp, stamp the medium and small size flower in morocco and lightly shade with the matching color and die cut with coordinating die. Shape with your deluxe flower shaping kit.

Using your leafy accents stamp, stamp your double leaves using your peeled paint ink and color with same ink. Die cut with coordinating dies and shape in the 3D shaping mold.

Using your Patchwork Pockets and Patterns stamp, stamp the zigzag with teal zeal and die cut with coordinating die.

Using your Buttons and Blooms Paper Pad cut the background mat 4" x 6". Using a craft knife cut around the edges of the hexagons to make a slit to put your sentiment mat under. Cut a white mat 4 ½” x 2 ¾ and stamp with “hope you get all patched up real soon” sentiment from your Hand Stitched Accents Cling set using Teal Zeal ink.

Cut your white card base 8 1/2" x 6 1/4" and using a bone folder for a cleaner line fold in half.

Assemble Card

Slide your sentiment mat under your slits in your hexagons. Slide your zig zag in and out of your sentiment mat and adhere both in place. Adhere 1 medium flower and two leaves in the bottom right corner and 1 small flower and 2 leaves in the top left corner. Tie a bow with the twine and adhere in the top center of your card. Decorate with stickles as desired.