Always and forever Tulip Time Card

New on the Heartfelt Creations Blog today, my new quick and easy card using the Tulip Time Collection.

Heartfelt Creations Products Used

HCD17220 Tulip Vase & Fillers Die
HCPC3859 Tulip Vase & Fillers Stamp Set
HCDP1298 Tulip Time Paper Collection
TSMP707 Memento Ink Bamboo Leaves
TSBL11 Brilliance Sunflower Yellow
HCST1401 Deluxe Flower Shaping  Kit
159723 Designer Dries Clear Adhesive
HCDA1449 Stack and Store Daubers

Other products used

White cardstock
Stickles Diamond
Glossy Accents

3mm Yellow Ribbon

Front Panel

Instructions

Using your Tulip vase & Fillers Stamp set stamp your tulips, leaves using Smokey Gray ink. Color your tulips with your Sunflower ink and your stems and leaves with the Bamboo Leaves ink. Cut with coordinating dies. 

Stamp your fillers with Bamboo Leaves ink and cut with coordinating dies. Shape with your Deluxe Flower Shaping Kit. Decorate with stickles.

Cut your white card base 12" x 6". You will use the full sheet of patterned cardstock for this card. Cut the bottom part of your cardstock into 2 mats 5 7/8 x 5 7/8" (these will be your front panel and your back panels). Cut the top of the cardstock into 2 mats 5 7/8" x 5 7/8" (these will be your insert panels). Trim the green decorative borders. Cut into 2 strips 5 7/8" long.

Rear Panel

Card assembly - fold your white card base in half. Adhere your front and rear panels. Adhere the green border strip down the left hand side of the front panel and again down the left hand side of the rear panel. Adhere your insert mats. Make a bouquet of tulips and fillers and adhere above the bucket. Using 3d adhesive adhere your sentiment. Adhere a small yellow bow above your sentiment. Decorative with stickles as desired. Decorate the dots of the boots with glossy accents or dimensional magic.

Happy Crafting x

Inside Panels

Tulip Time Easel Card

New on the Heartfelt Creations blog today, my Easel card using the NEW! Tulip Time Collection. Hope you are inspired to create something beautiful today.

Heartfelt Creations products used 

HCD17219 Tulip Bouquet Die  

HCD17221 Tulip Cart & Fence Die  

HCPC3859 Tulip Bouquet Cling Stamp Set  

HCPC-861 Tulip Cart & Fence Cling Stamp Set

HCDP1-298 Tulip Time Paper Collection

HCD17119 Classic Border Basics Die
HCD17118 Delicate Border Basics Die
HCD17211 Decorative Pocket Accents Die
HCD17204 Arrows and Banners Die
HCPC3845 Just For You Sentiment Cling Stamp Set
HCST1401 Deluxe Flower Shaping Kit
159723 Designer Dries Clear Adhesive
Stack and Store Daubers 

Other products used 

White card for stamping and die cutting

Acetate

Distress Ink Victorian Velvet

Brilliance Pearlescent Coral

Versafine Smokey Gray

Distress Antique Linen

Distress Peeled Paint
Distress Walnut Stain
Ribbon Green Gingham

Instructions

Stamp you fence 3 times using you Smokey Gray ink. Shade lightly with the Antique Linen ink. Cut with Coordinating die.

Using your Smokey Gray ink stamp your row of Tulips twice, your bucket of tulips once and your 3 stem tulip once. Color your flowers with the Pearlescent Coral ink and highlight with the Victorian Velvet Ink. Color the leaves with the Peeled Paint ink. Color the bucket lightly with the Smokey Gray ink. Cut with coordinating dies. Shape with your Deluxe Flower Shaping Kit

Stamp you cart using Smokey Gray ink and color with Antique Linen and Walnut Stain ink an die cut with coordinating die. Using you white cardstock, die cut 2 of the shorter decorative dies and one of the filigree borders using your decorative Pockets Accents die. Using your Delicate Border Basics die set cut one of each of the leafy borders. Die cut 2 banners from the Arrows and Banners Die set. Stamp your "you are so thoughtful" sentiment from the Just for you stamp set using Smokey Gray ink.

Using 2 of the same sheets of cardstock from your Tulip Time Paper Collection cut 2 of the same mats 6 7/8" x 6 7/8". 

Using white cardstock cut your cardbase in two sections 7 1/8" x 10 1/2", place a bone fold so the larger piece is 7 1/8" x 7 1/8". Second mat 7 1/8" x 7 1/8". 

Front panel - Adhere your patterned mat to its matching white mat. Using your Classic Border Basics die, select the die that matches the 2 decorative strips you cut. Line it up across the top of you mats, die cut. Adhere 1 strip to the front and one strip to the back as pictured.

Trim you fence posts. 1st stamped image, cut in the centre so you only have 3 palings attached to each post(this will be your center gate section). 2nd stamped image trim so you have the post on the right and only and 6 palings (this will be your right side). 3rd stamped image trim so you have 8 palings (this will be your left section). Adhere to your front panel using 3d adhesive so it sits a little higher than the original fence and the gate opens onto the pathway.

Trim your tulip flowers to fit into you cart. Adhere to your cart front using 3d adhesive. Using the leftover tulips adhere above the fence to conceal the tall fence panel on the mat. Adhere you bucket of tulips using 3d adhesive. Using the leftover tulip.

Adhere a bow in center of the top of the card and another in the center of the tulips in the bucket. Adhere to the front panel of your white cardbase to create your easel. 

Inside panel - Adhere your patterned mat. Adhere your shaped 3 tulip spray to the bottom right side. Adhere the 2 smaller decorative strips together only along the base (when in place your easel will sit in between both of these strips. Using 3d adhesive adhere your 2 banners together. Adhere the scalloped decorative strip along the bottom and adhere the two joined strips to the top with the opening of the strip facing upwards. Using 3d adhesive adhere to the front patterned mat approximately 1/2" to 3/4" from the bottom. Adhere a bow in the center. Place your easel in the opening of the decorative dies to complete your card. You can decorate with glitter as desired.

Happy Crafting x 

Tulip Time Treat bag..

New on the Heartfelt Creations Blog today! Debuting the Tulip Time Collection. Hope you like my treat bag...

Heartfelt Creations Used

HCD17221 Tulip Cart & Fence Die

HCPC3861 Tulip Cart & Fence Cling Stamp Set
HCD17211 Decorative Pocket Accents Die
HCD17203 Ornamental Tags Die
HCD17179 Butterfly Kisses Decorative Die
HCPC3847 Celebrate Love Sentiment Stamp Set

Other products used

White card for stamping and die cutting
Acetate
Distress Ink Victorian Velvet
Brilliance Pearlescent Coral
Versafine Smokey Gray
Distress Antique Linen
Distress Peeled Paint
3mm stitched pink ribbon

Instructions

Using your white cardstock, die cut 2 of the shorter decorative strips using your Decorative Pockets Accents Die. Die cut 1 decorative circle from the Butterfly Kisses Decorative Die set. Die cut 1 tag from the Ornamental Tags Die set. Stamp your "Best Wishes" sentiment from the Celebrate Love Stamp set using Smokey Gray ink. 

Using your Smokey Gray ink stamp your row of Tulip flowers 3 times. Color your flowers with the Pearlescent Coral ink and highlight with the Victorian Velvet Ink. Color the leaves with the Peeled Paint ink. Cut with coordinating die.

Stamp your Fence twice using your Smokey Gray ink. Shade lightly with the Antique Linen ink. Cut with coordinating die. Using a strip of acetate 2.5" adhere your fence panels, overlap the post in the center. Trim of the end of the acetate. Let dry completely. Trim along the fence lines so as to conceal the acetate.  When dry bend it around so the post panels line up and glue in place. You will overlap the post so that you only have a post showing on the left and on the right. Cut a strip of white cardstock 6/8" wide x 11 3/4". TIP: when glueing the next stage don't glue the strip on the fence post knobs as you will be sliding your decorative strips in afterwards) On the inside of the giftbag adhere inside the fence post about 3/4 of the way up, bend this over to the other fence post until you get your desired height handle and continue on the inside of your giftbag. You will have a strip that will run along the bottom. Bend into place. Using glue around the base of the fence and glue along the strip underneath adhere your decorative circle to your giftbag, hold in place until well set. Using your two decorative die cuts, trim of the slitted sections. Glue together so scalloped edges face outwards, adhere a strip of ribbon to conceal the joins. Adhere over the top of the handle and in behind your posts. Add a little glue behind the post to keep everything in place. Adhere your stamped tag and add a bow to finish your handle. 

Adhere your flower strip around the bottom and trim when they meet. Adhere so that a little of the leave stems adhere to the bottom decorative circle it will hold the giftbag together more firmly. With the offcut tulips trim 2 to 3 tulips and adhere them up one side of the fence post. 

Happy crafting x

Patchwork Daisy Celebrating you Card

New on the Heartfelt Creations Blog today. The Patchwork Daisy Collection. This is another project using these cute flowers. I hope you enjoy..

Heartfelt Creations Products Used

HCPC3854 Hand Stitched Background Cling Stamp set.
HCPC3853 Patchwork Daisy Border Cling Stamp set.
HCD17209 Patchwork Daisy Border Die
HCD17210 Eyelet Border Basics Die
HCD17120 Fleur Border Basics Die
HCPC3825 Butterfly Kisses Cling Stamp Set

HCST1401 Deluxe Flower Shaping Tool Kit

159723 Designer Dries Clear Adhesive
DDOTS 3d foam dots
HCDA2450 Stack & Store Daubers
TSMP602 Memento Teal Zeal
TSMP707 Memento Bamboo Leaves

Other products Used

White Cardstock
Versacolor White Pigment Ink
Ranger White Embossing Powder
Anti Static Pad
Heat Gun

Blending Tool
Assorted white buttons
Blue Sheer Ribbon
Silver Twine Ribbon

Card instructions

Cut your white card base 11 1/2" x 6 1/4". Fold in half. Using your Fleur Border Basics Die. Die cut a wavy edge down the right hand front side of your card. Using your Eyelet Border Basics Die, cut one eyelet border to match. Line this up with your Fleur Border basics die to get a strip. 

Cut a white mat 5 3/4" x 6 1/4" and using an anti static pad and wipe over your white cardstock, this stops things sticking on your image when you heat set. Using your Handstitched Background Cling stamp, stamp your background using your white pigment ink. Cover in white embossing powder and shake of the excess and heat set with a heat gun. When cooled and dried using a blending tool blend the teal zeal ink all over the stamped image, shading lighter in the middle and darker to the edges. When covered wipe of with a dry cloth to reveal the white embossed image. Line this up on your card front and using tape hold in place your Fleur Border basics die to match the curve of your card front. Trim to size and adhere your eyelet strip over the front. Using 3d dots adhere to your card front.

Using an anti static pad wipe over your cardstock, stamp your Patchwork Daisy Border using white ink and cover in white embossing powder and shake of excess and heat set with a heat gun. When cooled and dried using your stack and store daubers color your flowers in teal zeal a little heavier than you background and color the leaves in bamboo leaves. Wipe with a dry cloth to reveal the white embossed image. Die cut with coordinating die and trim to fully removed from the cardstock and using 3d dots adhere to the card front. Adhere the flowers with the 3D dots and use a little glue under the border to hold onto your card front. You will get a wavy up and down effect by using a combination of 3D dots and glue.

Tie a sheer ribbon around the top of the card and tie a bow. Tie a bow with the silver twine and adhere over the top. Adhere different size white buttons to the flower centers.

Hope you enjoyed my card

Happy Crafting 

Tracy x x

Fashionista Congratulating you card

New on the Heartfelt Creations blog today, the Exquisite 

Fashionista Collection. I have laced up a corset card just for you today. I hope you enjoy. 

Heartfelt Creations Products Used

HCD17215 Floral Fashionista Die
HCD17216 Floral Corset Die
HCD17217 Elements of Fashion Die
HCPC3855 Floral Fashionista Cling Stamp set
HCPC3856 Floral Corset Cling Stamp set
HCPC3857 Elements of Fashion Cling Stamp set
HCFB1471 3D Petite Florals Mold
HCPC3854 Hand Stitched Background Cling Stamp set

HCD17203 Ornaments Tags Die

HCPC3847 Celebrate Love Sentiments
HCD27191 Intricate Swirls Frame
HCPC3825 Leafy Accents Cling Stamp set

HCD17193 Leafy Accents Die

HCFB1467 Leafy Accents Mold

159723 Designer Dries Clear Adhesive
HCDA2450 Stack & Store Daubers
HCST1401 Deluxe Flower Shaping Tool Kit
DDOTS 3d adhesive

Other Products Used

Black Cardstock

White Cardstock

Neutral Cardstock

Black 3mm ribbon

Black Eyelets
Silver Rhinestone
White Lace
Versafine Olympia Green
Distress Peeled Paint
Versafine Onyx Black
Versafine Smoky Grey
Distress Vintage Photo
Distress Walnut Stain

Instructions

Using your neutral cardstock, cut your card base 12" x 6". Bone fold at the 7 1/2". Cut a mat of black cardstock 7 1/2" x 6 and join at the back to make a large card. This will give you a two tone card back. Cut a white mat 7" x 5 3/4" and adhere to the insert of your card.

Using your Intricate Swirls Die cut 1 frame using black cardstock. Using your Elements of Fashion Die, cut one background in black cardstock.

Using your Hand stitched Background Stamp, using Versafine Smoky Grey ink, stamp on white cardstock. Using a blending tool ink with Vintage Photo and then with Walnut Stain.

Using Versafine Smoky, stamp your bodice from the Floral Fashionista Stamp set on white cardstock and using a blending tool ink with Vintage Photo and the with Walnut Stain.

Using Versafine Smoky grey stamp your lace up corset from the Fashionista Corset Stamp set on white cardstock. Using a croppadile or eyelet tool punch the holes and set black eyelets in each hole. Thread with 3mm ribbon. 

Stamp your Leafy Accents stamp on white cardstock in Versafine Olympia Green ink and color with Peeled Paint, cut with coordinating die and spray lightly with water and shape in Leafy Accents Shaping Mold.

Using your Floral Fashionista Die, die cut a selection of flowers using black cardstock. Lightly spray with water and shape in the Petite Florals Shaping Mold. Adhere 2 together for each flower. 

Die cut 1 black and 1 white tag using Ornamental Tags die. Stamp  "Congratulations" from the Celebrate Love Sentiments stamp set on the white tag using Versafine Onyx Black ink.

Card Assembly - Cut a little slit in the top right corner of the black intricate swirls mat and slide in the hand stitched background mat, adhere in place with glue. Using 3d adhesive, adhere the mats on a slight angle to the card front. Under the bottom edge adhere your lace. Lay down the black elements swirl on the left hand side of your card front.

Then adhere your leaf spray in the bottom left corner and in the top right side of the bodice. Using 3d adhesive adhere your bodice in place. 

Adhere your lace up corset over the bodice. Adhere your Petite Florals 2 on the left, 1 on the bottom and 1 smaller flower on the top right of the bodice. Adhere rhinestones to the flower centers.

Adhere your black tag and using 3d adhesive adhere your white "congratulations" tag above the black tag. Adhere a little lace in the top left corner just under the bodice and adhere a small piece of lace just under the "congratulations" tag.

Happy Crafting 

Tracy x x

Hope your all patched up card

New on the Heartfelt Creations Blog today. My super simple "Hope you get all patched up real soon" card made with the Buttons & Blooms Collection.

Heartfelt Creations Products

HCD17205 Buttons & Blooms Die
HCPC3849 Buttons & Blooms Cling Stamp Set
HCD17206 Patchwork Pocket & Patterns Die
HCPC3850 Patchwork Pocket & Patterns Cling Stamp

HCPC3851 Hand Stitched Accents Cling Stamp Set

HCD17193 Leafy Accents Die
HCPC3835 Leafy Accents Cling Stamp Set
HCFB1467 3D Leafy Accents Shaping Mold

HCDP1295 Buttons and Blooms Paper Collection
TSMP707 Memento Dye Ink - Bamboo Leaves
TSMP201 Memento Dye Ink - Morocco

TSMP602 Memento Dye Ink - Teal Zeal

HCST1401 Deluxe Flower Shaping Kit
159723 Designer Dries Clear Adhesive
DDots Double Dots 100pc - 3D Foam Circles

Other Products Used

Distress Peeled Paint Ink
White Cardstock
Diamond Stickles
Twine

Instructions

Using your Buttons and Blooms stamp, stamp the medium and small size flower in morocco and lightly shade with the matching color and die cut with coordinating die. Shape with your deluxe flower shaping kit.

Using your leafy accents stamp, stamp your double leaves using your peeled paint ink and color with same ink. Die cut with coordinating dies and shape in the 3D shaping mold.

Using your Patchwork Pockets and Patterns stamp, stamp the zigzag with teal zeal and die cut with coordinating die.

Using your Buttons and Blooms Paper Pad cut the background mat 4" x 6". Using a craft knife cut around the edges of the hexagons to make a slit to put your sentiment mat under. Cut a white mat 4 ½” x 2 ¾ and stamp with “hope you get all patched up real soon” sentiment from your Hand Stitched Accents Cling set using Teal Zeal ink.

Cut your white card base 8 1/2" x 6 1/4" and using a bone folder for a cleaner line fold in half.

Assemble Card

Slide your sentiment mat under your slits in your hexagons. Slide your zig zag in and out of your sentiment mat and adhere both in place. Adhere 1 medium flower and two leaves in the bottom right corner and 1 small flower and 2 leaves in the top left corner. Tie a bow with the twine and adhere in the top center of your card. Decorate with stickles as desired.

Fesitve Holiday Christmas Card

New on the Heartfelt Creations Blog today, my Festive Holiday Step Card. to see the full collection head over to Heartfelt Creations Festive Holly Collection

Heartfelt Creations Products

Festive Holiday Stamp HCPC3792
Festive Holly & Cardinal Stamp HCPC3791
Festive Holly & Cardinals Die HCD17145

Festive Holiday Die HCD17146
Festive Holiday Paper Collections HCDP1280
Window Box Elements Die HCD7150
Deluxe Flower Shaping Kit HCST1401
Designer Dries Clear Adhesive 159723
Designer Dries White Adhesive 153951
Memento Tuxedo Black TSMP900

 

Other Products Used

White card for stamping/die cutting
Copic YG63 (leaves)
Copic R27 (berries)
Bazzill Maraschino
Bazzill White
Red Ribbon
Distress Glitter Rock Candy
Glossy Accents
Nuvo Glitter Pen

Instructions

Using your red cardstock cut 2 base cards 5 12/16” x 12”. Using a bone folder on piece 1, bone fold at the 7 5/16” and fold. On your second piece bone fold at 3 4/16” and fold and again at 3 4/16” and fold to create front step. Join the two pieces together in the middle to make the middle section equal 7 5/16”.

  

Using white cardstock cut 2 mats 5 1/2” x 7 1/8”. Cut 2 mats 5 1/2" x 3”.

Using your Festive Holiday Paper Collection, cut 2 mats 5 5/16'” x 7” and 2 mats 5 5/16” x 5 3/4”.

Using white cardstock cut 2 die cuts using your festive Holiday die.

Using white cardstock cut 1 die cut using your Window Box Elements die.

Using your Festive Holiday & Cardinal stamp, stamp 3 of each of the holly sprays and cut with coordinating dies. Color you Berries using either your R27 Copic pen. Color your leaves using either a YG63 Copic pen. Shape using your Deluxe Shaping Tool Kit. 

Using white cardstock cut 2 mats, 3 x 2 ¾” and 2 5/16” x 2” (cut a matching mat for the smaller white mat using your patterned cardstock 2 ½” x 1 ¾”), and using your Festive Holiday Stamp set, stamp your “with love at Christmas time” on the bigger mat and the “For you at Christmas” on the smaller mat. Using 3d adhesive adhere your “For you at Christmas” sentiment to the matching patterned mat.

Using your off cut from your patterned paper (the white decorative fence panel) trim to 5 5/16” wide and fussy cut around the decorative fence panel.

Using a second piece of cardstock from the paper collection fussy cut out the birdhouse.

Lay your card down flat and adhere your White mats to each panel and then repeat with the matching patterned mats.

On panel 1 adhere your white decorative strip to the bottom of the card and then adhere your holly sprays one to the left and one to the right and adhere your sentiment over the top. Tie a bow out of red ribbon and adhere to the top of the sentiment and adhere a holly spray in the center of the ribbon. 

Using your Festive Holiday die cuts slide your “with love at Christmas” sentiment in between the two and adhere in place. Adhere 1 holly spray to the top center and adhere a red bow and then adhere another holly spray to the ribbon center. Adhere another holly spray to the bottom. Using 3d adhesive adhere to the top left of panel 3. Using 3d adhesive adhere your fussy cut bird house.

On panel 4 adhere your fussy cut decorative fence panel and adhere a holly spray in the bottom right on the fence line.

Using a Wink of Nuvo glitter brush pen highlight your holly leaves and your birdhouse. Apply glossy accents to the berries. Apply dries clear glue to your birdhouse and glitter with a glitter of choice to create a snow effect. 

Happy Crafting
Tracy x x