Patchwork Daisy Celebrating you Card

New on the Heartfelt Creations Blog today. The Patchwork Daisy Collection. This is another project using these cute flowers. I hope you enjoy..

Heartfelt Creations Products Used

HCPC3854 Hand Stitched Background Cling Stamp set.
HCPC3853 Patchwork Daisy Border Cling Stamp set.
HCD17209 Patchwork Daisy Border Die
HCD17210 Eyelet Border Basics Die
HCD17120 Fleur Border Basics Die
HCPC3825 Butterfly Kisses Cling Stamp Set

HCST1401 Deluxe Flower Shaping Tool Kit

159723 Designer Dries Clear Adhesive
DDOTS 3d foam dots
HCDA2450 Stack & Store Daubers
TSMP602 Memento Teal Zeal
TSMP707 Memento Bamboo Leaves

Other products Used

White Cardstock
Versacolor White Pigment Ink
Ranger White Embossing Powder
Anti Static Pad
Heat Gun

Blending Tool
Assorted white buttons
Blue Sheer Ribbon
Silver Twine Ribbon

Card instructions

Cut your white card base 11 1/2" x 6 1/4". Fold in half. Using your Fleur Border Basics Die. Die cut a wavy edge down the right hand front side of your card. Using your Eyelet Border Basics Die, cut one eyelet border to match. Line this up with your Fleur Border basics die to get a strip. 

Cut a white mat 5 3/4" x 6 1/4" and using an anti static pad and wipe over your white cardstock, this stops things sticking on your image when you heat set. Using your Handstitched Background Cling stamp, stamp your background using your white pigment ink. Cover in white embossing powder and shake of the excess and heat set with a heat gun. When cooled and dried using a blending tool blend the teal zeal ink all over the stamped image, shading lighter in the middle and darker to the edges. When covered wipe of with a dry cloth to reveal the white embossed image. Line this up on your card front and using tape hold in place your Fleur Border basics die to match the curve of your card front. Trim to size and adhere your eyelet strip over the front. Using 3d dots adhere to your card front.

Using an anti static pad wipe over your cardstock, stamp your Patchwork Daisy Border using white ink and cover in white embossing powder and shake of excess and heat set with a heat gun. When cooled and dried using your stack and store daubers color your flowers in teal zeal a little heavier than you background and color the leaves in bamboo leaves. Wipe with a dry cloth to reveal the white embossed image. Die cut with coordinating die and trim to fully removed from the cardstock and using 3d dots adhere to the card front. Adhere the flowers with the 3D dots and use a little glue under the border to hold onto your card front. You will get a wavy up and down effect by using a combination of 3D dots and glue.

Tie a sheer ribbon around the top of the card and tie a bow. Tie a bow with the silver twine and adhere over the top. Adhere different size white buttons to the flower centers.

Hope you enjoyed my card

Happy Crafting 

Tracy x x

Fashionista Congratulating you card

New on the Heartfelt Creations blog today, the Exquisite 

Fashionista Collection. I have laced up a corset card just for you today. I hope you enjoy. 

Heartfelt Creations Products Used

HCD17215 Floral Fashionista Die
HCD17216 Floral Corset Die
HCD17217 Elements of Fashion Die
HCPC3855 Floral Fashionista Cling Stamp set
HCPC3856 Floral Corset Cling Stamp set
HCPC3857 Elements of Fashion Cling Stamp set
HCFB1471 3D Petite Florals Mold
HCPC3854 Hand Stitched Background Cling Stamp set

HCD17203 Ornaments Tags Die

HCPC3847 Celebrate Love Sentiments
HCD27191 Intricate Swirls Frame
HCPC3825 Leafy Accents Cling Stamp set

HCD17193 Leafy Accents Die

HCFB1467 Leafy Accents Mold

159723 Designer Dries Clear Adhesive
HCDA2450 Stack & Store Daubers
HCST1401 Deluxe Flower Shaping Tool Kit
DDOTS 3d adhesive

Other Products Used

Black Cardstock

White Cardstock

Neutral Cardstock

Black 3mm ribbon

Black Eyelets
Silver Rhinestone
White Lace
Versafine Olympia Green
Distress Peeled Paint
Versafine Onyx Black
Versafine Smoky Grey
Distress Vintage Photo
Distress Walnut Stain

Instructions

Using your neutral cardstock, cut your card base 12" x 6". Bone fold at the 7 1/2". Cut a mat of black cardstock 7 1/2" x 6 and join at the back to make a large card. This will give you a two tone card back. Cut a white mat 7" x 5 3/4" and adhere to the insert of your card.

Using your Intricate Swirls Die cut 1 frame using black cardstock. Using your Elements of Fashion Die, cut one background in black cardstock.

Using your Hand stitched Background Stamp, using Versafine Smoky Grey ink, stamp on white cardstock. Using a blending tool ink with Vintage Photo and then with Walnut Stain.

Using Versafine Smoky, stamp your bodice from the Floral Fashionista Stamp set on white cardstock and using a blending tool ink with Vintage Photo and the with Walnut Stain.

Using Versafine Smoky grey stamp your lace up corset from the Fashionista Corset Stamp set on white cardstock. Using a croppadile or eyelet tool punch the holes and set black eyelets in each hole. Thread with 3mm ribbon. 

Stamp your Leafy Accents stamp on white cardstock in Versafine Olympia Green ink and color with Peeled Paint, cut with coordinating die and spray lightly with water and shape in Leafy Accents Shaping Mold.

Using your Floral Fashionista Die, die cut a selection of flowers using black cardstock. Lightly spray with water and shape in the Petite Florals Shaping Mold. Adhere 2 together for each flower. 

Die cut 1 black and 1 white tag using Ornamental Tags die. Stamp  "Congratulations" from the Celebrate Love Sentiments stamp set on the white tag using Versafine Onyx Black ink.

Card Assembly - Cut a little slit in the top right corner of the black intricate swirls mat and slide in the hand stitched background mat, adhere in place with glue. Using 3d adhesive, adhere the mats on a slight angle to the card front. Under the bottom edge adhere your lace. Lay down the black elements swirl on the left hand side of your card front.

Then adhere your leaf spray in the bottom left corner and in the top right side of the bodice. Using 3d adhesive adhere your bodice in place. 

Adhere your lace up corset over the bodice. Adhere your Petite Florals 2 on the left, 1 on the bottom and 1 smaller flower on the top right of the bodice. Adhere rhinestones to the flower centers.

Adhere your black tag and using 3d adhesive adhere your white "congratulations" tag above the black tag. Adhere a little lace in the top left corner just under the bodice and adhere a small piece of lace just under the "congratulations" tag.

Happy Crafting 

Tracy x x

Hope your all patched up card

New on the Heartfelt Creations Blog today. My super simple "Hope you get all patched up real soon" card made with the Buttons & Blooms Collection.

Heartfelt Creations Products

HCD17205 Buttons & Blooms Die
HCPC3849 Buttons & Blooms Cling Stamp Set
HCD17206 Patchwork Pocket & Patterns Die
HCPC3850 Patchwork Pocket & Patterns Cling Stamp

HCPC3851 Hand Stitched Accents Cling Stamp Set

HCD17193 Leafy Accents Die
HCPC3835 Leafy Accents Cling Stamp Set
HCFB1467 3D Leafy Accents Shaping Mold

HCDP1295 Buttons and Blooms Paper Collection
TSMP707 Memento Dye Ink - Bamboo Leaves
TSMP201 Memento Dye Ink - Morocco

TSMP602 Memento Dye Ink - Teal Zeal

HCST1401 Deluxe Flower Shaping Kit
159723 Designer Dries Clear Adhesive
DDots Double Dots 100pc - 3D Foam Circles

Other Products Used

Distress Peeled Paint Ink
White Cardstock
Diamond Stickles
Twine

Instructions

Using your Buttons and Blooms stamp, stamp the medium and small size flower in morocco and lightly shade with the matching color and die cut with coordinating die. Shape with your deluxe flower shaping kit.

Using your leafy accents stamp, stamp your double leaves using your peeled paint ink and color with same ink. Die cut with coordinating dies and shape in the 3D shaping mold.

Using your Patchwork Pockets and Patterns stamp, stamp the zigzag with teal zeal and die cut with coordinating die.

Using your Buttons and Blooms Paper Pad cut the background mat 4" x 6". Using a craft knife cut around the edges of the hexagons to make a slit to put your sentiment mat under. Cut a white mat 4 ½” x 2 ¾ and stamp with “hope you get all patched up real soon” sentiment from your Hand Stitched Accents Cling set using Teal Zeal ink.

Cut your white card base 8 1/2" x 6 1/4" and using a bone folder for a cleaner line fold in half.

Assemble Card

Slide your sentiment mat under your slits in your hexagons. Slide your zig zag in and out of your sentiment mat and adhere both in place. Adhere 1 medium flower and two leaves in the bottom right corner and 1 small flower and 2 leaves in the top left corner. Tie a bow with the twine and adhere in the top center of your card. Decorate with stickles as desired.

Fesitve Holiday Christmas Card

New on the Heartfelt Creations Blog today, my Festive Holiday Step Card. to see the full collection head over to Heartfelt Creations Festive Holly Collection

Heartfelt Creations Products

Festive Holiday Stamp HCPC3792
Festive Holly & Cardinal Stamp HCPC3791
Festive Holly & Cardinals Die HCD17145

Festive Holiday Die HCD17146
Festive Holiday Paper Collections HCDP1280
Window Box Elements Die HCD7150
Deluxe Flower Shaping Kit HCST1401
Designer Dries Clear Adhesive 159723
Designer Dries White Adhesive 153951
Memento Tuxedo Black TSMP900

 

Other Products Used

White card for stamping/die cutting
Copic YG63 (leaves)
Copic R27 (berries)
Bazzill Maraschino
Bazzill White
Red Ribbon
Distress Glitter Rock Candy
Glossy Accents
Nuvo Glitter Pen

Instructions

Using your red cardstock cut 2 base cards 5 12/16” x 12”. Using a bone folder on piece 1, bone fold at the 7 5/16” and fold. On your second piece bone fold at 3 4/16” and fold and again at 3 4/16” and fold to create front step. Join the two pieces together in the middle to make the middle section equal 7 5/16”.

  

Using white cardstock cut 2 mats 5 1/2” x 7 1/8”. Cut 2 mats 5 1/2" x 3”.

Using your Festive Holiday Paper Collection, cut 2 mats 5 5/16'” x 7” and 2 mats 5 5/16” x 5 3/4”.

Using white cardstock cut 2 die cuts using your festive Holiday die.

Using white cardstock cut 1 die cut using your Window Box Elements die.

Using your Festive Holiday & Cardinal stamp, stamp 3 of each of the holly sprays and cut with coordinating dies. Color you Berries using either your R27 Copic pen. Color your leaves using either a YG63 Copic pen. Shape using your Deluxe Shaping Tool Kit. 

Using white cardstock cut 2 mats, 3 x 2 ¾” and 2 5/16” x 2” (cut a matching mat for the smaller white mat using your patterned cardstock 2 ½” x 1 ¾”), and using your Festive Holiday Stamp set, stamp your “with love at Christmas time” on the bigger mat and the “For you at Christmas” on the smaller mat. Using 3d adhesive adhere your “For you at Christmas” sentiment to the matching patterned mat.

Using your off cut from your patterned paper (the white decorative fence panel) trim to 5 5/16” wide and fussy cut around the decorative fence panel.

Using a second piece of cardstock from the paper collection fussy cut out the birdhouse.

Lay your card down flat and adhere your White mats to each panel and then repeat with the matching patterned mats.

On panel 1 adhere your white decorative strip to the bottom of the card and then adhere your holly sprays one to the left and one to the right and adhere your sentiment over the top. Tie a bow out of red ribbon and adhere to the top of the sentiment and adhere a holly spray in the center of the ribbon. 

Using your Festive Holiday die cuts slide your “with love at Christmas” sentiment in between the two and adhere in place. Adhere 1 holly spray to the top center and adhere a red bow and then adhere another holly spray to the ribbon center. Adhere another holly spray to the bottom. Using 3d adhesive adhere to the top left of panel 3. Using 3d adhesive adhere your fussy cut bird house.

On panel 4 adhere your fussy cut decorative fence panel and adhere a holly spray in the bottom right on the fence line.

Using a Wink of Nuvo glitter brush pen highlight your holly leaves and your birdhouse. Apply glossy accents to the berries. Apply dries clear glue to your birdhouse and glitter with a glitter of choice to create a snow effect. 

Happy Crafting
Tracy x x

Black Friday Elegant Card & Boxed Envelope

New on the Heartfelt Creations Blog today is the Black Friday Release. I have chosen to make an Elegant Card with matching Boxed Envelope. I hope you are inspired by my creation. Head over to Heartfelt Black Friday Release.

Heartfelt Creations Products Used

HCD17214 Ornate Pocket Accents Die
HCD17213 Elegant Pocket Accents Die
HCPC3819 Small Sweet Peony Cling Stamp Set
HCD17173 Small Sweet Peony Die

HCPC3821 Peony Bud & Blossom Cling Stamp Set
HCD17175 Peony Bud & Blossom Die

HCPC3847 Celebrate Love Sentiments
HCPC3835 Leafy Accents Cling Stamp Set
HCD17193 Leafy Accents Die
HCFB1467 Leafy Accents Shaping Mold
HCST1401 Deluxe Flower Shaping Tool Kit
159723 Designer Dries Clear Adhesive
HCDA2450 Stack & Store Daubers
  

Other Products Used

Black Cardstock
White Cardstock
Pink Ribbon
Versafine Onyx Black Ink
Distress Oxide Worn Lipstick
Versafine Olympia Green
Distress Peeled Paint
Colorbox Olive Pastel
Prills Ice Queen
Bone Folder

Video Tutorials

https://www.heartfeltcreations.us/video/173/How-to-Shape-Sweet-Peony-4-Different-Ways

https://www.heartfeltcreations.us/video/172/Sweet-Peony-Flower-Shaping-Basics

https://www.heartfeltcreations.us/video/195/Quick-and-Easy-Leafy-Accents-Using-the-Shaping-Mold

Card Instructions 

Using your Small Sweet Peony Stamp set, stamp your small and medium flowers using Distress Oxide Worn Lipstick Ink, set aside to dry or heat set with a heat gun before die cutting with coordinating dies. You will need 6 medium and 4 small flowers. Shape with Deluxe Flower Shaping Tool Kit. Adhere 2 of the same size flowers together to create 3 medium and 2 small.

Using your leafy accents stamp set, stamp 2 curly leaf flourish using Versafine Olympia Green and color with Distress Peeled Paint ink. Die cut with coordinating die and shape in the Leafy Accents Shaping Mold. You will be trimming to suit flowers.

Using your Sweet Peony & Bud stamp set stamp the large Peony using Distress Oxide Worn Lipstick and stamp the smaller bud using a combination of Worn Lipstick on the bud and Olive Pastel on the leaves, set aside to dry or heat set with a heat gun before die cutting with coordinating dies. Color the inside of the leaves with Distress Peeled Paint. Shape the bud using your Deluxe Flower Shaping Tool Kit.

Using white cardstock, cut your card base 12" x 6 2/16". Place a bone fold at the 7 1/4" this will leave you with 4 3/4" Cut another piece of white card stock 7 1/4" x 6 2/16". Adhere over the smaller piece to create 1 large size card. Let the join go to the back. Measure the small section at the back and add a piece of black cardstock.

For your insert cut 1 black mat 7" x 6" and a matching white mat 6 3/4"x 5 3/4".

For the front sentiment mats, cut 1 white mat 3 1/4" x 3 1/4", cut 1 black mat 3" x 3", cut 1 white mat 2 3/4" x 2 3/4" and stamp the smaller mat with the "Happy Anniversary" stamp from the Celebrate Love Sentiments Stamp Set using Versafine Onyx Black ink. Using 3d adhesive adhere your black mat to the bottom white mat and using 3d adhesive adhere your sentiment mat to the black mat. 

To create your decorate panel, die cut the panel from your Ornate Pockets & Accents Die. Trim the top black strip as desired and insert a white strip of card so that a little white section slips through the opening to the desired height. Adhere in place using your designer dries clear adhesive and then trim the bottom to a point. Add 1 medium flowers and leaves as desired. You will create a second decorative panel when creating the box/envelope.

Using your Ornate Pocket Accents Die, die cut 2 dies using black cardstock.

Card Assembly - Adhere your 2 die cuts to the front panel using designer dries clear. Adhere so they line up to create the diamond in the centre. Adhere the Peony blossom and then the peony bud. You want the leaves to be at the top of where the sentiment will sit.

Using 3d adhesive adhere your sentiment mat inside the diamond. Adhere your bow to the top of the diamond. Adhere your flowers to the bottom of the diamond. 1 medium in the middle and 2 small 1 each side. Add leaves as desired.

Adhere your black insert mat and your matching white insert mat on the right side of your card. Adhere your decorative panel to the right hand side. Keep your flowers flat in this section or for a TIP: alternately you can always make a double fold on the card edge approximately 1/2" to allow for a risen flowers.

Box/Envelope Instructions

Trim your black cardstock to 12" x 7 3/4". Place a bone fold at the 3 1/4" mark, then again in 3/4", then again in 7 3/8", and this will leave you 3/4"

Trim your second black cardstock at 4 3/4" x 1 3/4". Place a bone fold on the long edge at 1/2", then 3/4" and this will leave 1/2". You will need to repeat for the second side.

Trim your fourth black cardstock at 7 3/4 x 5 5/16". Place a bone fold along the long edge at 3/4". 

This is how your pieces will look. Using designer dries clear adhesive adhere the larger pieces together, the smaller strips will overlap at the bottom to add the front flap to your envelope and then adhere the sides in to create your box. Adhere the back strips first and then adhere the left and right front strips to make your envelope come together.

To create your second decorate panel, repeat the step from above. Add 1 medium flower and leaves as desired.

Using your Elegant Pockets Die, trim one flourish using black cardstock, keep 2 little flourishes from the offcuts, you will be using these next to your "congratulations" stamp.

Trim your white cardstock 7 1/2" x 4 5/16". Using your Celebrate Love Sentiment Stamps, stamp the congratulations in the center at the bottom. Adhere the 2 offcut flourishes from your Elegant Pockets Die cut. Adhere to the front of the envelope in the bottom section. Place a bow above the sentiment. You will need this in place to line up your decorative panel on the top of the envelope flap. TIP: you can leave adhering this until last to make sure it lines up.

Adhere your decorative top panel to your envelope front so that the tip lines up with the center of the bow and the left and right sides are flush with the edge of the opening flap. Adhere your black decorative flourish above this panel, this conceals where it adheres to the top for a cleaner finish. Add prills to your flowers centres.

Hope you enjoyed my project

Happy Crafting

Tracy x x

Patchwork Daisy Explosion Box

New on the Heartfelt Creations Blog today. My new explosion box using the lovely Patchwork Daisy Collection. To see the full range head over to Heartfelt Creations Patchwork Daisy.

Heartfelt Creations Materials 

HCD17208 Patchwork Daisy Die
HCPC3852 Patchwork Daisy Cling Stamp Set
HCD17209 Patchwork Daisy Border Die
HCPC3853 Patchwork Daisy Border Cling Stamp Set
HCDP1296 Patchwork Daisy Paper Collection

HCPC3843 Special Birthday Sentiments Cling Stamp Set

HCPC3845 Just for You Sentiments Cling Stamp Set
HCD17197 Furry Tailed Frolic Die
TSMP602 Memento Teal Zeal
TSMP707 Memento Bamboo Leaves
RACP531 Archival Vivid Chartreuse
HCD17100 Botanic Window Die
HCST1401 Deluxe Flower Shaping Tool Kit
159723 Designer Dries Clear Adhesive
HCDA2450 Stack and Store Daubers

DDOTS 3d dots

Other products used

White cardstock

Green Rhinestones
Brilliance Pearlescent Lavender

Instructions

Using white cardstock cut your base box to 12" x 12". Using a bone folder bone folder on the 4" mark and the 8" ink and turn and repeat. Cut out in corner to create a cross.

 

Using your patterned cardstock, select 2 sheets the same and trim the selected sheets to 3 3/4" x 3 3/4". You will require 5 for the front and 5 for the inside. Adhere with designer dries clear adhesive. You will require 2 more mats, 1 for the top of your box and one for the inside top of the box.

Using your sentiment stamps, stamp the "happy birthday" and the "let's celebrate you" 2 times each on white cardstock using Memento Teal Zeal ink and die cut with the circle die from the Furry Tailed Frolic Die set. Using the matching eyelet circle die, die cut 4 circles from the leftover cardstock. Using 3d dots adhere the sentiments to the matching circles. Adhere the sentiment circles flat on opposite sides of the box, 2 on the inside and 2 on the outside. Using the "have a wonderful birthday" stamp, stamp 4 times on white cardstock using Memento Teal Zeal ink and trim down to 3 3/4" x 1". Adhere the 1" strips flat on opposite sides of the box 2 on the inside and 2 on the outside. The outside and insides will look the same. Trim the striped cardstock down to 3 3/4" x 3/4", you will need 4 strips, adhere flat on the plain sides on the inside and repeat on the outside.

Using white cardstock cut 5 3/4" x 5 3/4", using a bone folder, place a bone fold line at the 3/4" mark all the way around, you will be left with a square in the middle measuring 4 1/4" x 4 1/4". Trim each end in a little to make a flap to adhere together to create your box lid. Adhere in place with designer dries clear adhesive. Adhere a patterned mat to the top of the lid.

Repeat the above step with 5 1/2" x 5 1/2" to create the inner box. you will end up with a box 4" x 4". Adhere a patterned mat to the top of the lid.

Using your Botanic Window die, die cut 2 die cuts. Line up each on the top of the smaller box lid. Adhere along the straight edge and run both into the middle until they meat, fold and adhere in place.

Using your sentiment stamp, stamp the "Happy Birthday to you" twice with Memento Teal Zeal ink and fussy cut, leave about a 1/4" strip along the bottom to fold to make a stand.

Using your Bamboo Leaves ink, stamp the Patchwork Daisies 2 times each size and the Patchwork Daisies in the Border set 2 times. Color the leaves in the Archival Vivid Chartruese and the flowers in the Pearlescent Lavender and cut with coordinating dies. Adhere the smaller sprays to the front and back of the botanic windows.

Adhere the sentiment to the front applying glue to the bottom lip and then using a dot of glue at the top of each sentiment push together to make a join.

 

Using the smaller daisy sprays, trim down to make 2 smaller pieces adhere one on the top of each side.

When your inner box is completed it will look like this.

Using your paper collection, select the purple border strips, you will need 2 strips. Line up the border and adhere around the edge of the box lid, 1 strip will cover 3 sides, then trim of and adhere the last panel and trim. Line up the larger daisy die cut onto the top of the box lid. When happy with there placement, bend slightly so the flower hangs over the sides. Adhere in place with designer dries clear adhesive on the leave and let the flowers float free.

 

Your box is now complete, add lime green rhinestones to your flower centers. NOTE - I have left the centre box float free, you can adhere in place if you like.

Happy Crafting

Tracy x x