Special Release -Tags for every occasion.

New Special Release on the Heartfelt Blog today. 

The Elegant Tags & Sentiments Collection. 

Hope you enjoy my Tags for every occasion.

Heartfelt Creations products used

HCD17200 Oakberry Lane Blossoms Die HCPC3842 Oakberry Lane Blossoms Stamp Set HCFB1-467 3D Blossoms Shaping Mold HCDP1294 Oakberry Lane Paper Collection HCD17202 Album Tags and Accents Die HCD17203 Ornamental Tags Die HCD17202 Arrows and Banner Die HCPC3843 Special Birthday Sentiments Cling Stamp Set HCPC3844 For My Friend Sentiments Cling Stamp Set HCPC3845 Just For You Sentiments Cling Stamp Set HCPC3846 Thank You Sentiments Cling Stamp Set HCPC3847 Celebrate Love Sentiments Cling Stamp Set HCPC3848 Cheerful Note Sentiments Cling Stamp Set HCS1-459-3 Assorted Bead Stamens Medium HCS1-460 Bridal Bouquet Stamens Small TSMP808 Memento Espresso Truffle 159723 Designer Dries Clear Adhesive DDOTS - Double Dots 100pc-3D Foam Circles HCST1401 Deluxe Flower Shaping Kit Other products used Memento Grape Jelly Brilliance Pearlescent Lavender Distress Spiced Marmalade Colorbox Orange Archival Magenta Hue Distress Peeled Paint Distress Aged Mahogany Versafine Smoky Gray Silver Edged Sheer Ribbon Cropadile Eyelets - Pink, purple and orange Cardstock - Pink, purple and orange Instructions TIP : Cut a large amount of tags from your leftover paper stacks, decorate with coordinating color flowers and have your sentiments cling sets on standby, there is a stamp for all occasion in these sets. With the ready made tag all you need to do is stamp it with the appropriate sentiment and you will always have something ready in a hurry. Using your Oakberry Lane Paper collection, select the sheet that fits your Album and Accents tag, you will use 2 sheets, cut two purple, 2 orange and 2 pink, but I have used the outer tag and inner tag, once each for each so that I end up with 2 different sizes for each color. You will be using the mats one up and one down. With the smaller one I have cut a matching larger tag to mount it on, so using your large tag cut 1 purple, 1 pink and 1 orange tag using bazzil.  Mount these using 3d dots. Using the smaller tag die cut 1 purple, 1 pink and 1 orange tag using Bazzill, adhere these to the remaining mats, these will be the same size and adhere flat using you designer dries clear adhesive. Apply a coordinating eyelet to the top of each tag. Purple - using you Oakberry Lanes Blossoms stamp, stamp large and small flowers using Memento Grape Jelly and color with Brilliance Pearlescent Lavender. Cut with coordinating dies. Highlight the edges using the Grape Jelly ink. Pink - using you Oakberry Lanes Blossoms stamp, stamp large flowers using Archival Magenta Hue ink and color with the same ink. Cut with coordinating dies. Highlight the edges using the same ink. Orange - using you Oakberry Lanes Blossoms stamp, stamp medium and small flowers using Distress Dried Marigold and color with Distress Spiced Marmalade. Cut with coordinating dies. Highlight the edges using the Colorbox Orange ink. Leaves - using your Oakberry Lane Blossoms stamp, stamp your leaves 20 times using Versafine Smoky Gray ink, color with Distress Peeled Paint ink and die cut with coordinating die. Highlight edges with Distress Aged Mahogany. Using your ornamental tags die, cut 1 purple mat. Using your ornamental tags die, cut 1 orange tag. Using your arrows and banner die, cut 1 pink mat, I have placed a bone fold mark in 1cm from each end then I have placed a second approx 1cm in this will allow your to fold the tails in at the end, put a 3d dots under each section. Spray your flowers with a mini mister and shape all the flowers and leaves using the 3D Blossoms Shaping Mold. When shaped adhere 2 of each flower together using designer dries clear adhesive. Set aside to dry before adding stamens. You may need to re highlight edges. Using your deluxe shaping kit, using the piercing tool and mat, pierce a hole in the flower centers and adhere white wired stamens to the purple flowers, the wire can be trimmed of, but leave one on the smaller flower and curl your wire, wrap it around a skewer or object of similar size and when you remove it you will be left with a spiraled wire. Adhere white stamens to the orange and pink flowers. Assemble your tags - Purple Purple tag 1 - Stamp your mat with "Happy Anniversary"  sentiment from the Celebrate Love Sentiments cling stamp set using Versafine Smoky Gray ink. Using 3d adhesive adhere your sentiment mat. Adhere 2 leaves and one large flower to the top left of the tag. Thread through your ribbon. Purple tag 2 - Stamp your tag with "Happy Mothers Day" sentiment from the Thank You Sentiments Cling stamp set. Adhere 3 leaves and one large and 1 small flower to the bottom right of the tag. Thread through your ribbon.   Pink Pink tag 1 - Stamp your tag with "thinking of you" sentiment from the Cheerful You Sentiments Cling stamp set. Adhere 3 leaves and two large and 1 small flower to the bottom left of the tag. Thread through your ribbon. Pink tag 2- Stamp your mat with "Just wanted you to know"  sentiment from the For my Friend Sentiments cling stamp set using Versafine Smoky Gray ink. Using glue on the left adhere your sentiment mat in place and then using glue on the right hold in place to create an arched mat. Adhere 3 leaves and 2 large flowers to the top of the banner and 1 leaf and 1 medium flower below the banner. Thread through your ribbon. Orange Orange tag 1 - Stamp your orange tag with "Happy Birthday" sentiment from the Special Birthday Sentiments Cling stamp set. Adhere 4 leaves and 3 medium flowers to the top of the tag. Using 3d dots adhere your sentiment tag. Thread through your ribbon. Orange tag 2- Stamp your tag with "you are so thoughtful"  sentiment from the Just for you Sentiments cling stamp set using Versafine Smoky Gray ink.   Adhere 3 leaves and 3 medium flowers to the bottom of the tag and 1 leaf and 1 small flower to the top of the tag. Thread through your ribbon. Hope you enjoyed my tags Happy Crafting Tracy x x

Oakberry Lane, just swingin by card...

New on the Heartfelt Creations Blog today. The New Oakberry Lane Collection, hope you like my Just Swinging by card.. goes nicely with last weeks see saw card..

Heartfelt Creations products used

HCD17197 Oakberry Lane Furry Tailed Frolic Die
HCPC3839 Oakberry Lane Furry Tailed Cling Stamp Set
HCDP1294 Oakberry Lane Paper Collection
HCD17155 Circles Basics Large Die
TSMP808 Memento Espresso Truffle

159723 Designer Dries Clear Adhesive
DDOTS - Double Dots 100pc-3D Foam Circles
HCST1401 Deluxe Flower Shaping Kit

Other products used

Mauve sheer ribbon
White Cardstock
Diamond Stickles
Glossy Accents
Copic Markers - E50 E51 E31 E33 R20 critters, W1 tyres.

Instructions

Cut your card base 6" x 6". Cut your patterned mat 5 3/4" x 5 3/4", die cut out the center with your largest die from your Circle Basics die set. Adhere the mat to your card front and then using the same die cut out the white center of the card. With your aperture cut line up your patterned circle and adhere to the inside of your card.

Stamp your critter in the tyre and the single critter using Memento Espresso Truffle using your Furry-tailed critters stamp set, color with your copics or pen or pencil of choice. Cut with coordinating die.

Using the white lace border from your Oakberry paper collection cut a border strip and adhere between the purple section. 

Adhere your swinging critter to the right-hand side and then line up your little critter so it looks like he is pushing him and adhere in place.

Using your sheer ribbon tie and bow and adhere at the top of your tyre. Decorate with stickles and glossy accents as desired.

Hope you enjoyed my card

Happy Crafting

Tracy x x 

Oakberry Lane Seesaw Card

New on the Heartfelt Creations Blog today. The very cute 
Oakberry Lane Collection. Hope you enjoy my Seesaw card.

Heartfelt Creations products used

HCD17199 Oakberry Lane Antics Die
HCPC3841 Oakberry Lane Antics Cling Stamp Set
HCPC3840 Oakberry Cottage & Sentiments Cling Stamp Set
HCDP1294 Oakberry Lane Paper Collection
HCD17155 Circles Basics Large Die
TSMP808 Memento Espresso Truffle

159723 Designer Dries Clear Adhesive
DDOTS - Double Dots 100pc-3D Foam Circles
HCST1401 Deluxe Flower Shaping Kit

Other products used

Mauve sheer ribbon
White Cardstock
Diamond Stickles
Glossy Accents
Copic Markers - E50 E51 E31 E33 R20 critters, E33 Seesaw, E71 E50 Nut, W1 tyres, R20 flowers, G21 grass and ribbons.

Instructions

Cut your card base 6" x 6". Cut your patterned mat 5 3/4" x 5 3/4", die cut out the center with your largest die from your Circle Basics die set. Adhere the mat to your card front and then using the same die cut out the white center of the card. With your aperture cut line up your patterned circle and adhere to the inside of your card.

Stamp your seesaw using Memento Espresso Truffle using your Oakberry Antics stamp set, color with your copics or pen or pencil of choice. Cut with coordinating die, die cut a second image just using white cardstock, adhere together for a stronger die cut, you will need to fussy cut of the bottom of the seesaw, only the stem section leave the circle section intact. Fussy cut of the tyre and keep this will be adhered later. Just ink up the middle of the stamp and stamp a seesaw base and also cut a second one on white cardstock to adhere together to make a stronger diecut. Fussy cut out the bottom of the seesaw leaving the circle section on top. Apply an eyelet to each circle section of the seesaw, so they line up. You will put this together with a brad and this will allow your seesaw to move.

Using the white lace border from  your Oakberry paper collection cut a border strip and adhere between the purple section. Adhere your seesaw (only the base section) with designer dries clear adhere to the front of the card (along the lace line,this will allow your seesaw to move. Using 3d dots to adhere your tyres on the left and right side, this will act as a stopper for your seesaw.

Using your sheer ribbon tie and bow and adhere at the top of your aperature. Decorate with stickles and glossy accents as desired.

Happy Crafting
Tracy x x

Embossed Sweet Peony

New on the Heartfelt Creations Blog today. My embossed Sweet Peony.
To see this range head over to Heartfelt - Sweet Peony Collection.

Heartfelt Creations products used HCPC-3820 Large Sweet Peony Stamp Set HCPC-3819 Small Sweet Peony Stamp Set HCPC-3821 Peony Bud and Blossom HCD1-7174 Large Sweet Peony Die HCD1-7173 Small Sweet Peony Die HCD1-7175 Peony Bud and Blossom Die HCD1-7146 Festive Holiday Die HCDP1-288 Sweet Peony Paper Collection HCDA2-450 Stack and Store Daubers HCST1-401 Deluxe Flower Shaping Kit 159723 Designer Dries Clear adhesive Other products used Anti static pad, heat gun, white cardstock for stamping and die cutting, white linen card, 3d dots, versacolor White ink for stamping flowers, Ranger superfine white embossing powder, Brilliance Pearlescent Coral ink for coloring flowers, Colorbox Olive pastel ink for stamping leaves, Memento Pistachio for coloring leaves. Clear prills. Instructions I like to do all my die cutting, shaping and coloring first. Using white cardstock Die cut 2 each of the Festive Holiday Dies TIP: When embossing it is always good to wipe down your cardstock with an anti-static pad, this stops what I call flyaways from getting on your design, this will give you a crisp clean image with no unwanted dots on you image. With the following flowers I stamped once then put on the embossing powder and heat set, then I did the second image and then the third repeating each step – 1. anti-static the cardstock 2. stamp the image 3. apply the embossing powder 4. heat set the image. Using your Large Sweet Peony Stamp Set, stamp the flowers 2 times – (4 flowers in total, I used all 4 for 1 large flower and 1 flower from the small set) using the White Versacolor ink and then the embossing powder and heat set. Using your Small Sweet Peony Stamp set, stamp the largest double peony 1 times – (2 flowers in total, I used 1 small flower to complete my large flower) using the White Versacolor ink and then the embossing powder and heat set.  TIP:  when stamping with Pigment ink you will have to let it dry or set with a heat gun before die cutting and coloring to avoid smudging. Using the Large Sweet Peony Stamp set stamp the medium leaf 2 times using the Color Box Olive Pastel Ink. Using your Peony Bud and Blossom stamp set, stamp your Large bud once using a mixture of the Olive Pastel on the leaves and the Worn Lipstick on the bud. When your stamped images have dried, use your stack and store daubers to color your flowers using the Brilliance Pearlescent Coral. and the leaves with Memento Pistachio ink. Once dried die cut with coordinating dies on your die cutting machine.  Using your mini mister lightly spray the back of your flowers and leaves, shape your flowers and leaves using a Heartfelt Mold or your Deluxe Flower Shaping Kit. Adhere your clear prills to the flower center. Cut your card base using the white linen cardstock 12” x 6 1/8”. Fold your card in half, I like to run a bone folder over the spine of the card to give it a clean finish. Trim the selected mat from the Sweet Peony Collection, trim this down to 5 7/8” x 5 7/8”, we will be using the remainder of this sheet for the insert, trim the remaining cardstock to 5 7/8” x 5 7/8”. Adhere your front patterned mat and then adhere 2 green mats to the inside of your card. Now you have all your elements done, you can complete your card. Adhere your Festive Holiday die cuts to the top and bottom of your card. Find the center point on the left this is where your large flower will be adhered, line up the blossom so you have room for one at the top and one at the bottom, adhere these in place, adhere your flower and 2 leaves. Using 3d adhesive adhere the “To a Beautiful You” sentiment. Happy Crafting Tracy x x